HPE 7.68TB NVMe U.3 PCIe Gen 4.0 x4 RI SFF SC 2.5" 15mm SSD Hynix PE8110 Series P47843-B21 P48222-001 P55173-004
Note: The HPE SK Hynix PE8110 Series U.3 NVMe SSD is compatible with HPE ProLiant Gen10 Plus and Gen11 servers using U.3/NVMe Smart Carrier NVMe (SCN), Smart Carrier (SC), or Basic Carrier (BC) drive bays.
Additional Note: HPE refers to P47843-B21 and P48222-001 as Multi-Vendor (MV) SSD part numbers.
Other Related Part Numbers
VO007680KXPTQ, HFS7T6GEETX070N, PE8110, P55173-004, P47843-B21, P48222-001
Functional Equivalent Part Numbers
P19821-B21, P20606-001, P19822-B21, P20021-B21, P20767-001, P20022-B21,
P20143-B21, P20804-001, P20144-B21, P22280-B21, P26420-001, P22281-B21,
P47825-B21, P48130-001, P47826-B21, P50220-B21, P50957-001, P51456-B21,
P52326-B21, P64890-B21, P64891-B21, P65200-001, P26104-B21, P26960-001,
P26105-B21, R7R39A, P50221-B21, P50958-001, P31189-B21, P41491-001,
P31190-B21, P52662-B21, P52663-B21, P40485-B21, P41510-001, P40567-B21,
P41565-001, P40992-B21, P47847-B21, P48226-001, P50222-B21, P50959-001,
P51457-B21, P52327-001, P63837-B21, P64613-001, P63838-B21, P64848-B21
Core Specifications
-
Capacity: 7.68TB
-
Interface: PCIe Gen4 x4 (NVMe 1.4)
-
Form Factor: 2.5" SFF (15mm)
-
Connector: U.3 (backward compatible with U.2)
-
NAND Type: 128-layer 3D TLC NAND
-
Controller: SK Hynix Aquarius
-
Workload Type: Read Intensive (RI) – 1.0 DWPD
Performance
-
Sequential Read: Up to 6,200 MB/s
-
Sequential Write: Up to 3,870 MB/s
-
Random Read (4K): Up to ~582,000 IOPS
-
Random Write (4K): Up to 190,000 IOPS
Reliability & Efficiency
-
Endurance: ~13.7PB – 14PB TBW
-
MTBF: Up to 2.5–3.35 million hours
-
Power Consumption: ~10W active / ~5–6W idle
-
Security: Digitally Signed Firmware (DS)
HPE ProLiant Server Compatibility
Gen11 (Full Gen4 Performance):
DL320, DL325, DL345, DL360, DL365, DL380, DL385, DL560
ML110, ML350
Gen10 Plus (Full Gen4 Performance):
DL325, DL345, DL360, DL380, DL385
ML350
Apollo Systems (Gen10 Plus):
XL220n, XL225n, XL290n, XL420
HPE Alletra:
Alletra 4110, Alletra 4120
Backward Compatibility Notes
-
Gen10 (Non-Plus): Supported with NVMe backplane (runs at PCIe Gen3 speeds)
-
Gen9 and Older: Not recommended due to firmware and NVMe limitations
Key Features
- U.3 interface with backward compatibility to U.2 infrastructure
- Optimized for read-heavy workloads and enterprise storage environments
- Designed for high-density, high-throughput data center deployments
- Supports modern NVMe ecosystems with improved latency and efficiency
