Cisco 3.84TB SATA 6G EV SFF 2.5" SSD – PM883 Series (With Cisco Tray)

Samsung MZ‑7LH3T80 | Cisco UCS‑SD38T61X‑EV | 16‑100745‑01

•  Includes Genuine Cisco 2.5" SFF Hot‑Swap Tray / Caddy

---

Other Related Part Numbers

UCS‑SD38T61X‑EV, 16‑100745‑01, MZ7LH3T8HMLT‑00AK5, MZ7LH3T8HMLT‑000K2, MZ‑7LH3T80

---

Core Specifications & Performance

• Capacity: 3.84TB (3.8TB class)
• Form Factor: 2.5‑inch SFF (7mm height)
• Interface: SATA III 6Gb/s
• NAND Type: Samsung 3D V‑NAND TLC
• Workload Type: Enterprise Value (EV) – Read‑Intensive / Mixed Use

Performance (Sustained)

• Sequential Read: Up to 550 MB/s
• Sequential Write: Up to 520 MB/s
• Random Read (4KB): Up to 98,000 IOPS
• Random Write (4KB): Up to 30,000 IOPS

---

Reliability, Power & Integrated Features

• Endurance: ~1.3 DWPD
• MTBF: 2,000,000 hours
• Power Consumption: ~2.3W (Read) / ~3.6W (Write)
• Data Protection & Security:
  • Power Loss Protection (PLP)
  • AES 256‑bit Hardware Encryption

---

Product Overview

The Cisco UCS‑SD38T61X‑EV is an enterprise‑grade Enterprise Value (EV) SSD based on the Samsung PM883 platform, designed for reliable, high‑density storage in Cisco UCS environments. It is optimized for read‑intensive and mixed workloads commonly found in virtualization, databases, and enterprise data centers.

• This listing includes a genuine Cisco 2.5" hot‑swap drive tray, ready for install in supported UCS systems.

---

Compatibility & Supported Systems

Cisco UCS – Officially Supported

• C‑Series Rack Servers:
  • C220 M5 / M5S / M5sn / M5sx
  • C240 M5
  • C480 M5
• Storage / Modular Platforms:
  • UCS C4200 chassis
  • UCS X‑Series: X210c, X215c (M6 / M7 / M8 nodes)
• Hyper‑Converged Infrastructure:
  • HyperFlex HX240C‑M5L / HX240C‑M6L

---

Drive Tray / Carrier Information (Included)

• Tray Type: Cisco UCS 2.5" SFF hot‑swap caddy
• Height Support: 7mm SATA SSD
• Tool‑less installation
• Fully compatible with Cisco UCS SATA backplanes

•  No additional tray required for Cisco UCS systems

---

Cross‑Platform Notes (Informational)

While physically compatible with standard 2.5" SATA bays found in Dell PowerEdge, HPE ProLiant, Lenovo ThinkSystem, and Supermicro servers, this SSD carries Cisco‑specific firmware. Management features and health reporting may be limited outside Cisco UCS environments.

---

Important Compatibility Notes

• SATA‑only device (not SAS compatible)
• Requires SATA III (6Gb/s) controller/backplane
• Cisco OEM firmware optimized for UCS platforms
• Includes Cisco tray/caddy (not universal between vendors)