[shortdesc]

• 8-port Gigabit PoE+ compact fanless switch with 2x 10G SFP+ and 2x 1G uplinks, Network Essentials license.

[/shortdesc]

[properties] 

Properties	C9200CX-8P-2X2G-E
Description	Catalyst 9200CX 8-port 1G, 2x10G and 2x1G, PoE+, Network Essentials
Product Family	Cisco Catalyst 9200 Series Switches
Product Type	Switch

[/properties] [specifications]

Specifications	C9200CX-8P-2X2G-E
Downlinks total 10/100/1000 or PoE+ copper ports	8 ports full PoE+
Uplink configuration	2x 1G copper, 2x 10G SFP+ fixed uplinks
Default primary power supply	315W AC internal
Fans	Fanless
Primary power supply	315W AC internal
Available PoE power with single primary power supply only*	240W
Optional secondary power supply	N/A
Available PoE power with additional secondary power supply*	N/A
Switching capacity	56 Gbps
Switch capacity with Stacking	N/A
Forwarding rate	41.66 Mpps
Forwarding rate with Stacking	N/A
*Limited by port number and port rating (for example, 24 PoE+ 30W ports = 720W)
Chassis Dimensions	Inches: 1.73 x 10.6 x 9.6 Centimeters: 4.4 x 26.9 x 24.4
Chassis + FEP + Fan Dimensions (HxWxD)	Inches: 1.73 x 10.6 x 9.6 Centimeters: 4.4 x 26.9 x 24.4
Weight	Pounds: 6.6 Kilograms: 2.99
Mean time between failures (hours)	736,000

[/specifications] [accesories]

Mounting Accessories
ACC-KIT-T1=	Accessory kit with 19 inch Type 1 rack mount
RACK-KIT-T1=	19, 23, 24 inch and ETSI Type 1 rack mount kit
4PT-KIT-T2=	4 Point rack mount kit New
REC-KIT-T1=	Recessed 1RU rack mount for 9200L and 9200 switches
C9K-MGNT-TRAY	Magnet and Mounting Tray for compact switches
C9K-CMPCT-DIN-MNT	DIN Rail Mount for compact switches
RACKMNT-19-CMPACT	19-Inch Rack Mounting Brackets for compact switches
C9K-CMPCT-CBLE-GRD	Cable guard for compact switches (for C9K-WALL-TRAY)
C9K-WALL-TRAY	Wall mount bracket for compact switches
C9K-CMPCT-DESK-MNT	Under desk mount for compact switches
C9K-ACC-RBFT	Rubber Feet For Table Top Setup 9200 and 9300
C9K-ACC-SCR-4	12-24 and 10-32 Screws For Rack Installation, Qty 4
CAB-GUIDE-1RU	1RU Cable Management Guides 9200 and 9300

[/accesories]

Technical Details

The Cisco Catalyst C9200CX-8P-2X2G-E is a Layer 3 managed compact, fanless switch with 8 Gigabit (10/100/1000) PoE+ ports, two fixed 10G SFP+ uplinks, and two fixed 1G copper uplinks, running Cisco IOS XE with the Network Essentials license. It provides a 240 W PoE+ budget from a fixed internal power supply to power devices such as wireless access points, IP phones, and IP cameras. Its switching capacity is 60 Gbps and its forwarding rate is 44.64 Mpps. The fanless chassis operates silently, which suits offices, classrooms, retail, and other space-constrained or noise-sensitive locations.

Overview

The Cisco Catalyst C9200CX-8P-2X2G-E is a compact, fanless, 8-port Gigabit PoE+ access switch in the Cisco Catalyst 9200CX series.

The Catalyst 9200CX compact models are fanless, use a fixed internal power supply, do not stack, and run Cisco IOS XE on the Cisco UADP 2.0 Mini ASIC. The C9200CX-8P-2X2G-E has two fixed 10G SFP+ uplinks and two fixed 1G copper uplinks. With the Network Essentials license, it supports Layer 2 switching and routed access, including static routing, RIP, EIGRP stub, OSPF up to 1,000 routes, Policy-Based Routing, PIM stub multicast, VRRP, 802.1X, and MACsec-128 encryption.

Cisco positions the Catalyst 9200CX as the successor to the Catalyst 2960CX and 3560CX compact switches.

Best For

The Cisco C9200CX-8P-2X2G-E suits space-constrained and noise-sensitive access-layer deployments, such as offices, classrooms, retail, and smart-building locations, that need PoE+ for a small number of wireless access points, IP phones, or IP cameras. Its fanless compact chassis runs silently and mounts on a desk, wall, DIN rail, or in a rack, while its two 10G SFP+ uplinks connect to an aggregation or core layer. Its 240 W PoE+ budget is suitable for mixed PoE deployments; actual device counts depend on each powered device's power draw.

Not suitable if:

• You need more than 8 access ports.
• You need switch stacking (the Catalyst 9200CX does not stack).
• You need advanced Layer 3 routing (full OSPF/EIGRP, IS-IS) or segmentation (VRF, SGT); on the C9200CX, BGP, PTP, and MACsec-256 also require the Network Advantage tier.
• You need multigigabit (mGig) or UPOE access ports.
• You do not need PoE on the access ports.

Part Number Decode

• C9200CX indicates the compact, fanless platform within the Cisco Catalyst 9200 Series.
• 8P indicates 8 Gigabit (10/100/1000) PoE+ access ports.
• 2X indicates two fixed 10G SFP+ uplinks.
• 2G indicates two fixed 1G copper uplinks.
• -E indicates the perpetual Network Essentials license.