C9115AXE-X Specification
|
| Description |
Cisco Catalyst 9115AX Access Point, External antenna; Wi-Fi 6; 4x4:4 MIMO |
| Software |
● Cisco Unified Wireless Network Software Release 8.9 or later ● Cisco IOS ® XE Software Release 16.11 or later |
|
Supported wireless
LAN controllers
|
● Cisco Catalyst 9800 Series Wireless Controllers ● Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
|
802.11n version 2.0 (and related)
capabilities
|
● 4x4 MIMO with four spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support |
| 802.11ac |
● 4x4 downlink MU-MIMO with four spatial streams ● MRC● 802.11ac beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support |
| 802.11ax |
● 4x4 downlink MU-MIMO with four spatial streams
● Uplink/downlink OFDMA● TWT● BSS coloring
● MRC● 802.11ax beamforming
● 20-, 40-, 80-, and 160-MHz channels
● PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: A-MPDU (transmit and receive),
A-MSDU (transmit and receive)
● 802.11 DFS● CSD support
|
| Integrated antenna |
● 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth ● 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
|
External antenna
(sold separately)
|
● Cisco Catalyst 9115AXE Access Points are certified for use with
antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
● Cisco offers the industry's broadest selection of antennas,
delivering optimal coverage for a variety of deployment scenarios
|
| Interfaces |
● 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz ● Management console port (RJ-45) ● USB 2.0 (enabled via future software) |
| Indicators |
● Status LED indicates boot loader status, association status, operating status,
boot loader warnings, and boot loader errors
|
| Dimensions (W x L x H) |
● Access point (without mounting brackets):
C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm),
C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm)
|
| Input power requirements |
● 802.3at Power over Ethernet Plus (PoE+),
802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5=
(Note: This injector supports only 802.3af)
Note: When 802.3af PoE is the source of power,
both 2.4-GHz and 5-GHz radios will be reduced
to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet.
In addition, the USB port will be off.
|
| Environmental |
Cisco Catalyst 9115AXI ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
Note: When the ambient operating temperature exceeds 40°C,
the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and
5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet,
and the USB interface will be disabled.Cisco Catalyst 9115AXE
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. ● Operating temperature: -4° to 122°F (-20° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft.
|
| System memory |
● 2048 MB DRAM● 1024 MB flash |
|
Available transmit
power settings
|
2.4 GHz ● 23 dBm (200 mW)● 20 dBm (100 mW) ● 17 dBm (50 mW)● 14 dBm (25 mW) ● 11 dBm (12.5 mW)● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW)● 2 dBm (1.56 mW) ● -1dBm (0.79mW)● -4dBm (0.39mW)
5 GHz ● 23 dBm (200 mW)● 20 dBm (100 mW) ● 17 dBm (50 mW)● 14 dBm (25 mW) ● 11 dBm (12.5 mW)● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW)● 2 dBm (1.56 mW) ● -1dBm (0.79mW)● -4dBm (0.39mW) |
| Regulatory Domain |
Options Selectable for A / B / C / D / E / F / G / H / I / K / N / Q / R / S / T / Z
● 2.412 to 2.472 GHz; ● 5.180 to 5.320 GHz; ● 5.500 to 5.700 GHz; ● 5.745 to 5.825 GHz; |