{"product_id":"afl-ofi-400-optical-fiber-identifier-for-use-with-250m-900m-ribbon-2mm-and-3mm-jacketed-optical-fibers","title":"AFL OFI 400 Optical Fiber Identifier for Use with 250µm, 900µm, Ribbon, 2mm and 3mm Jacketed Optical Fibers","description":"\u003cp\u003eThe Noyes Fiber OFI 400 Optical Fiber Identifier detects signals transmitted through single-mode fiber without disrupting traffic. This fiber optic tester features a two-position head, multiple tone signal detection, and set reference. Measure\/display fiber core or relative power on a backlit LCD during installation, maintenance, rerouting, or restoration.\u003c\/p\u003e\n\u003cp\u003eBy simply clamping an Optical Fiber Identifier onto a gently bent fiber, the unit will indicate if there is [No Signal], [Tone], or [Traffic] and identify signal direction. This is all done with no head swapping or adjustments for different types of fiber, 250µm, 900µm, 3mm jacketed cable and ribbon fiber.\u003c\/p\u003e\n\u003cp\u003eRugged, hand-held, and easy-to-use fiber optic test instrument designed to detect and measure the core power levels of optical signals on single-mode optical fiber without disrupting traffic on that fiber. The OFI-400 is simply clamped onto a fiber and indicates the presence and direction of traffic, CW signals, and 270, 330, 1000, and 2000 Hz test tones. It allows technical personnel to unambiguously identify a specific fiber and eliminates the risk of accidental disruption of revenue service.\u003c\/p\u003e\n\u003cp\u003eThe OFI-400 uses a unique optical head design featuring a 2-position plunger that enables it to be used with 250µm, 900µm, and ribbon fiber or 2mm and 3mm jacketed fiber. Other brands of optical fiber identifiers require users to purchase, store, and swap out optical plungers each time a different type of fiber is tested.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRugged, hand-held, lightweight, easy-to-use\u003c\/li\u003e\n\u003cli\u003eAccepts 250µm and 900µm coated fiber, 3mm jacketed fiber cable and ribbon fiber\u003c\/li\u003e\n\u003cli\u003eIdentifies light carrying fiber and the direction of traffic\u003c\/li\u003e\n\u003cli\u003eLow insertion loss - traffic remains uninterrupted\u003c\/li\u003e\n\u003cli\u003eDetects 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone with an audible and visual indication\u003c\/li\u003e\n\u003cli\u003eUnique Optical Head with 2-position Plunger for use with all fiber types\u003c\/li\u003e\n\u003cli\u003eBuilt-in power meter calibrated for 250µm bare fiber\u003c\/li\u003e\n\u003cli\u003eDetects Traffic, CW and 270, 330, 1000 and 2000 Hz Tones\u003c\/li\u003e\n\u003cli\u003eIndicates direction of transmissions\u003c\/li\u003e\n\u003cli\u003eLow Insertion Loss\u003c\/li\u003e\n\u003cli\u003eBuilt-in self-test\u003c\/li\u003e\n\u003cli\u003eAutomatic power down and battery gauge\u003c\/li\u003e\n\u003cli\u003eOne-hand operation\u003c\/li\u003e\n\u003cli\u003e1-Year Product Warranty\u003c\/li\u003e\n\u003cli\u003e3-Year Recommended Calibration Interval\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLive fiber identification\u003c\/li\u003e\n\u003cli\u003eTone detection\u003c\/li\u003e\n\u003cli\u003eUsed during installation, maintenance, rerouting, or restoration to positively identify fibers prior to cutting and splicing\u003c\/li\u003e\n\u003cli\u003eLive fiber detection avoids technician-induced outages\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFiber identification and tracing with CW or tones\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMake core power measurements\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor use with 250µm, 900µm, ribbon, 2mm and 3mm Jacketed Fibers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFIBER TYPE – 250 μm coated fiber (SMF-28 with 250 μm CPC6 coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum level detected, average power: \u003cspan\u003e-45 dBm, -50 dBm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInsertion loss (typical\/max): 0.6 dB\/0.8 dB, 2.5 dB\/2.6 dB\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFIBER TYPE – 3 mm jacketed fiber (SMF-28\/28E with 250 μm CPC6 coating and 3 mm, yellow jacket)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum level detected, average power:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1310 nm, CW, Tone, Traffic, -30 dBm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1550 nm, CW, Traffic: -33 dBm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1550 nm, Tone: -33 dBm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOPTICAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDetector Type: InGaAs\u003cbr\u003eWavelength Range: 800 – 1700 nm\u003cbr\u003eCalibrated Fiber and Wavelength: 250 µm @ 1550 nm (SMF-28\/28E)\u003cbr\u003eFiber Stress: \u0026lt;100 kPSI max\u003cbr\u003eWorking Fiber Size: 250 µm, 900 µm, ribbon, 2 mm and 3 mm jacketed\u003cbr\u003eTone Detection: 270, 330, 1000, 2000 Hz (±5 %)\u003cbr\u003eCore Power Measurement Range: +13 to -50 dBm @ 1550 nm, 250 µm (SMF-28\/28E)\u003cbr\u003eMeasurement Units: dBm, dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGENERAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUser Interface: Multi 7 segment LCD; 3 LEDs; 1 piezo buzzer\u003cbr\u003ePower: 2 x 1.5 V AAA alkaline\u003cbr\u003eBattery Life: \u0026gt;10,000 operations typical\u003cbr\u003eOperation Temperature: 0°C to 50°C 90 % RH (Non-condensing)\u003cbr\u003eStorage Temperature: -30°C to +60°C 90 % RH (Non-condensing)\u003cbr\u003eDimensions (H x W x D): 22 x 3.8 x 2.8 cm (8.5 x 1.5 x 1.1 in)\u003cbr\u003eWeight: 168 g (6 oz)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload Product Spec Sheet:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/s3-us-west-1.amazonaws.com\/foscoshopify\/pdf\/AFL-NOYES-OFI-200-OFI-400-Spec-Sheet.pdf\"\u003eAFL NOYES OFI Series Fiber Identifier Spec Sheet (PDF)\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/s3-us-west-1.amazonaws.com\/foscoshopify\/pdf\/AFL-NOYES-OFI-200-OFI-400-Users-Guide.pdf\"\u003eAFL Optical Fiber identifier User's Guide (PDF)\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AFL","offers":[{"title":"Default Title","offer_id":49084681683200,"sku":"OFI400","price":3366.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0388\/5331\/2557\/files\/ofi400-4.png?v=1785216578","url":"https:\/\/alotechparts.com\/products\/afl-ofi-400-optical-fiber-identifier-for-use-with-250m-900m-ribbon-2mm-and-3mm-jacketed-optical-fibers","provider":"Alo Tech Solutions","version":"1.0","type":"link"}