{"product_id":"afl-noyes-ofi200d-optical-fiber-identifier","title":"AFL NOYES OFI200D Optical Fiber Identifier","description":"\u003cp\u003eThe AFL Noyes OFI 200D Optical Fiber Identifier is a low-cost, high-tech approach to non-invasive fiber optic signal detection. Using a low insertion loss, macro-detection technique, it discriminates signals without disrupting service or overstressing fiber.\u003c\/p\u003e\n\u003cp\u003eBy simply clamping an Optical Fiber Identifier onto a gently bent fiber, the unit will indicate if there is [No Signal], [Tone], or [Traffic] and identify signal direction. This is all done with no head swapping or adjustments for different types of fiber, 250µm, 900µm, 3mm jacketed cable and ribbon fiber.\u003c\/p\u003e\n\u003cp\u003eRugged, hand-held, and easy-to-use fiber optic test instrument designed to detect optical signals transmitted through a single-mode fiber without disrupting traffic on that fiber. During installation, maintenance, rerouting, or restoration it is often necessary to isolate a specific fiber.\u003c\/p\u003e\n\u003cp\u003eBy simply clamping an Optical Fiber Identifier onto a fiber, the unit will indicate if there is NO SIGNAL, TONE, or TRAFFIC and the associated signal direction. It allows technical personnel to unambiguously identify a specific fiber and eliminates the risk of accidental disruption of revenue service.\u003c\/p\u003e\n\u003cp\u003eThe OFI-200 is equipped with a unique two-position head design that can be configured, without tools or recalibration, to work with 250 µm, 900 µm, ribbon, or jacketed fiber. The slim design of the head is particularly valuable when working in splice trays, cabinets, and pedestals where workspace is limited.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo adapters to purchase, store, swap, or misplace:\u003c\/strong\u003e The OFI-200 uses a unique optical head design featuring a two-position plunger that enables it to be used with 250 µm, 900 µm, and ribbon fiber or 2 mm and 3 mm jacketed fiber. Other brands of optical fiber identifiers require users to purchase, store, and change optical plungers each time a different type of fiber is tested.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow insertion loss for in-service ID tasks:\u003c\/strong\u003e The OFI-200 optical head induces a safe, repeatable macro-bend to the fiber that allows a small amount of light to escape for analysis. The insertion loss induced by the macro-bend is too small to affect the signal on the fiber and the integrity of the fiber is unaffected by the measurement process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for the real world:\u003c\/strong\u003e The OFI-200 is a simple, easy-to-use tool that features rugged, drop-proof construction perfect for inside or outside plant use. Its ergonomically designed macro-bend trigger is comfortable to use and the integrated, backlit LCD display enables it to be used in dimly lit spaces.\u003c\/p\u003e\n\u003cp\u003eThe OFI-200 uses readily available 1.5 V AAA batteries, which power thousands of fiber tests before needing to be replaced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRugged, hand-held, lightweight\u003c\/li\u003e\n\u003cli\u003eAccepts 250 µm, 900 µm coated fiber, 3 mm jacketed fiber cable and ribbon fiber\u003c\/li\u003e\n\u003cli\u003eNo head swapping or adjustments\u003c\/li\u003e\n\u003cli\u003eIdentifies light carrying fiber and indicates the direction of traffic\u003c\/li\u003e\n\u003cli\u003eLow insertion loss, traffic remains uninterrupted\u003c\/li\u003e\n\u003cli\u003eIndicates Tone signal visually and audibly\u003c\/li\u003e\n\u003cli\u003e2 kHz Tone detection\u003c\/li\u003e\n\u003cli\u003eLow battery indication\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLive fiber identification, Used during installation, maintenance, rerouting, or restoration to positively identify fibers prior to cutting and splicing\u003c\/li\u003e\n\u003cli\u003eTone detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFiber Type: 250 μm coated fiber (SMF-28 with 250 μm CPC6 coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePARAMETER: Minimum level detected, average power\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTEST CONDITIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1310 nm, CW or Traffic: -40 dBm\u003c\/p\u003e\n\u003cp\u003e1310 nm, Tone: -43 dBm\u003c\/p\u003e\n\u003cp\u003e1550 nm, CW or Traffic: -45 dBm\u003c\/p\u003e\n\u003cp\u003e1550 nm, Tone: -50 dBm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsertion loss (typical): \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1310 nm: 0.6 dB\u003c\/p\u003e\n\u003cp\u003e1550 nm: 2.5 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFIBER TYPE: \u003c\/strong\u003e 3 mm jacketed fiber (SMF-28 with 250 μm CPC6 coating and 3 mm, yellow jacket)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePARAMETER: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum level detected, average power: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1310 nm, CW or Traffic: -30 dBm\u003c\/p\u003e\n\u003cp\u003e1310 nm, Tone: -32 bBm\u003c\/p\u003e\n\u003cp\u003e1550 nm, CW or Traffic: -33 dBm\u003c\/p\u003e\n\u003cp\u003e1550 nm, Tone: -37 dBm\u003c\/p\u003e\n\u003cp\u003eInsertion loss (typical): \u003c\/p\u003e\n\u003cp\u003e1310 nm: 0.8 dB\u003c\/p\u003e\n\u003cp\u003e1550 nm: 2.5 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOPTICAL SPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eDetector Type: InGaAs\u003cbr\u003eWavelength Range: 800 - 1700 nm\u003cbr\u003eCalibrated Size of Fiber and Wavelength: N\/A\u003cbr\u003eFiber Stress: \u0026lt;100 kPSI max\u003cbr\u003eFiber Size: 250 µm, 900 µm, ribbon, 2 mm or 3 mm and jacketed fiber\u003cbr\u003eTone Detection: 2000 ±100 Hz\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eGENERAL SPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eDisplay Type: N\/A\u003cbr\u003ePower: 1 9-Volt Alkaline\u003cbr\u003eBattery Life: \u0026gt;10,000 operations typical\u003cbr\u003eOperation Temperature: 0°C to 50°C 90 % RH (Non-condensing)\u003cbr\u003eStorage Temperature: -30°C to +60°C 90 % RH (Non-condensing)\u003cbr\u003eDimensions (H x W x D): 22 x 3.8 x 2.8 cm (8.5 x 1.5 x 1.1 in)\u003cbr\u003eWeight: 210 g (7.5 oz)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlexScan® FS300 (quad) and FS200 (single-mode) OTDRs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e•SmartAuto® 1-button automated testing for fast results\u003cbr\u003e• LinkMap® color-coded icons for easy troubleshooting\u003cbr\u003e• FleXpress® mode (FS200) completes OTDR test in \u0026lt;5 seconds!\u003cbr\u003e• Integrated Source, Power Meter and VFL\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptical Light Sources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e•\u003c\/strong\u003e Encircled Flux Compliant\u003cbr\u003e• 5-Year Product Warranty\u003cbr\u003e• Integrated LED and Laser light sources\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload Product Spec Sheet:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1026\/4509\/files\/OFI1-11-2000.pdf?v=1598648650\" target=\"_blank\"\u003eAFL NOYES OFI-200 Fiber Identifier Spec Sheet (PDF)\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AFI","offers":[{"title":"Default Title","offer_id":49084681945344,"sku":"OFI200D","price":2635.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0388\/5331\/2557\/files\/ofi200d-2.png?v=1785216581","url":"https:\/\/alotechparts.com\/products\/afl-noyes-ofi200d-optical-fiber-identifier","provider":"Alo Tech Solutions","version":"1.0","type":"link"}